Upper limit of enhancement of boiling heat transfer in a narrow vertical rectangular channel due to passing bubbles

An experimental study has been made of saturated boiling heat transfer for water and R113 in a narrow vertical rectangular channel (2 mm space, 20 mm wide, and 200 mm long) at atmospheric pressure, in which the vertical heated surface (10 mm long and 20 mm wide) is located on one side at a position of 150 mm from its entrance and bubbles are forcibly passed through it at a designated period from 0.33 to 1.0 sec. The experiment shows that the heat transfer coefficients are increased by the bubble passing through the heated surface for the value of thermal diffusivity,a, times period, T₀, of the passing bubbles above about 6×10^–9 m² (a T ₀>6×10^–9 m²) while fora T ₀< 6×10^–9 m², the heat transfer coefficients become independent of the period and the effectiveness of the enhancement of the heat transfer owing to the passing bubble disappears.

---

Die obere Grenze der Verbesserung des Wärmeübergangs beim Sieden in einem vertikalen, rechteckigen Kanal infolge von aufsteigenden Blasen

Zusammenfassung Es wurden Experimente über den Wärmeübergang beim Sättigungssieden mit Wasser und R113 in einem engen, vertikalen, rechteckigen Kanal (2 mm Abstand, 20 mm Breite und 200 mm Länge) bei Umgebungsdruck durchgeführt, wobei die vertikale, beheizte Oberfläche (10 mm lang und 20 mm breit) auf der einen Seite in einem Abstand von 150 mm vom Eintritt angeordnet ist und die Blasen zwangsweise durch den Kanal sich mit einem Periodenabstand von 0,033 bis 1,0 s bewegen. Das Experiment zeigt, daß die Wärmeübergangskoeffizienten durch das Vorbeistreichen der Blasen an der beheizten Oberfläche verbessert werden, wenn das Produkt aus Temperaturleitfähigkeit,a, mal der Periode, T₀, der vorbeistreichenden Blasen größer als 6×10^–9 m² liegt, während unterhalb dieses Wertes der Wärmeübergangskoeffizient unabhängig von der Blasenperiode ist und die Effektivität der Wärmeübergangsverbesserung infolge der Blasenströmung verschwindet.

---

Nomenclature a thermal diffusivity of liquid - ¯h time-averaged heat transfer coefficient - q _w heat flux at wall - T ₀ period of passing bubble - T _w(t) temperature of heated surface - T _w amplitude of heated surface temperature Greek symbols thermal conductivity - thickness of liquid film     

Effects of 3,4-dihydrophenyl groups in water-soluble phospholipid polymer on stable surface modification of titanium alloy

The surface of a titanium (Ti) alloy substrate was modified by a simple and quick process using a water-soluble polymer, and the effects of 3,4-dihydroxyphenyl (DHP) groups in the polymer side chain on the modification process were examined. The polymers (PMDP) composed of both 2-methacryloyloxyethyl phosphorylcholine (MPC) unit and 3,4-dihydroxyphenyl methacrylate unit were synthesized for surface anchoring. The Ti alloy substrate was coated with PMDP using an aqueous solution of the polymer. A PMDP layer with a thickness of 20 nm was formed on the Ti alloy substrate simply by dip coating for 10 s without drying. Even when the Ti alloy substrate with PMDP coating was immersed in the aqueous medium for 1 week, no change in the thickness was observed, i.e., the PMDP layer was bound to the surface very stably. Oxidation of the DHP groups reduced the stability of the polymer layer significantly. Thus, the DHP groups play a significant role in achieving stable binding. Protein was adsorbed on the Ti alloy substrate; however, this was not observed for the PMDP-coated Ti alloy substrate. In conclusion, we confirmed the effects of DHP groups in PMDP on the stability of the coating on the Ti alloy substrate. Moreover, we found that surface treatment using PMDP was simple, quick, and reliable, and thus, it has great potential for improving biofouling of Ti alloy substrates used in medical devices.     

Nucleotide excision repair proteins rapidly accumulate but fail to persist in human XP-E (DDB2 mutant) cells

The xeroderma pigmentosum (XP-E) DNA damage binding protein (DDB2) is involved in early recognition of global genome DNA damage during DNA nucleotide excision repair (NER). We found that skin fibroblasts from four newly reported XP-E patients with numerous skin cancers and DDB2 mutations had slow repair of 6-4 photoproducts (6-4PP) and markedly reduced repair of cyclobutane pyrimidine dimers (CPD). NER proteins (XPC, XPB, XPG, XPA and XPF) colocalized to CPD and 6-4PP positive regions immediately (<0.1 h) after localized UV irradiation in cells from the XP-E patients and normal controls. While these proteins persist in normal cells, surprisingly, within 0.5 h these repair proteins were no longer detectable at the sites of DNA damage in XP-E cells. Our results indicate that DDB2 is not required for the rapid recruitment of NER proteins to sites of UV photoproducts or for partial repair of 6-4PP but is essential for normal persistence of these proteins for CPD photoproduct removal.     

Stereochemistry of reduction of the C-24,25 double bond in the conversion of desmosterol into cholesterol

Feeding of the chemically prepared [24-¹³C, 24-²H]desmosterol to cell-free systems derived from rat liver and silkworm gut and to cultured cells of Oryza sativa followed by deuterium-decoupled ¹H, ¹³C shift correlation NMR analysis of the biosynthesized cholesterol revealed the stereospecific incorporation of hydrogen atoms from the re-face of the C-24 position of desmosterol.     

Solid-phase synthesis of 2,3-diphenylpropionic acid library as VLA-4 antagonists

2,3-Diphenylpropionic acid library for VLA-4 antagonist was synthesized on solid-phase. Comparison of the two synthetic routes via an orthogonal generation of two aromatic amino functional groups are discussed. From this work, several compounds were identified as potent VLA-4 antagonists.     

Synthesis of 1,4-dihydro-2-methyl-4-oxo-3-quinolineglyoxylic acid and related compounds

The synthesis of 1,4-dihydro-1-methoxy or ethyl -2-methyl-4-oxo-3-quinolineglyoxylic acid derivatives are described. α-Acetoxy-1,4-dihydro-1-hydroxy-2-methyl-4-oxo-3-quinolineacetic acid esters ( 7a, 7a ), which are key intermediates, were prepared by catalytic hydrogenation of 2-acetoxy-3-acetyl-4-hydroxy-4-(2-nitrophenyl) crotonic acid lactone ( 6 ) in methanol or ethanol.